Citrix XenApp 6.5 Advanced Administration
Citrix 1Y0-A22
QUESTION NO: 1
An administrator needs to
validate the data store in a XenApp farm. The administrator should use the DSCHECK
command with the /CLEAN parameter after _______.
(Choose the correct option to
complete the sentence.)
A. restoring the
data store
B. backing up the
data store
C. restarting the XenApp server
D. restarting the
IMA Service on the data collector
QUESTION NO: 2
Scenario: An administrator in a XenApp farm is in the process of replacing a couple of the
failed
XenApp servers in the
farm. The administrator has been instructed to execute the DSCHECK
command once the
servers have been replaced. What will be
the outcome of executing the DSCHECK command?
A. Recover the
local data store
B. Purge corrupt
local host cache entries
C. Purge the data
store of incorrect entries
D. Display
information about servers in the farm
QUESTION NO: 3
Scenario: An administrator migrated the data store of a Citrix XenApp
6.5 server farm from
Microsoft SQL Server Express on XenApp server XAS01 to a separate Microsoft SQL Server 2008
cluster. The administrator tested the move, noted that
the cluster is running well and found no errors. None of the XenApp
6.5 servers can connect to the new location of the data store.
In this scenario, when should
the administrator use the DSCHECK command?
A. After
restarting the data collector
B. After using the
DSMAINT command
C. After running
the QFARM command
D. After using the
CHANGE CLIENT command
QUESTION NO: 4
When should an administrator use
the DSCHECK command line utility?
A. To fix errors
on server entries in the data store
B. To fix errors
related to configuring Proxy Authentication
C. To fix errors
in the local host cache on each XenApp 6.5 server
D. To generate a
report of logon/logoff activity for a XenApp 6.5
server
QUESTION NO: 5
Scenario: An administrator has
configured a XenApp Web site and customized the
footer text of
the site to
reflect the required customer-specific hyperlinks. The administrator now plans
to back up the site. Which file must the
administrator back up?
A. Default.ica
B. Web.config
C. Repair.SFO
D. WebInterface.conf
E. LoginMainFormFoot.inc
QUESTION NO: 6
After repairing a XenApp Web site, an administrator notices that the
customized footer text is
missing. Which file must the administrator restore
from backup?
A. Default.ica
B. Web.config
C. Repair.SFO
D. WebInterface.conf
E. LoginMainFormFoot.inc
QUESTION NO: 7
Scenario: An administrator used
the Server Configuration Tool to install a Microsoft SQL Server
Express data store database
automatically as part of a XenApp 6.5 farm
installation. The initial
configuration consisted of a
single zone and servers in a single physical location. The
administrator added an equal
number of servers and users to the farm at a second physical
location over a WAN. Which action would require the administrator
to migrate the data store database from Microsoft SQL Server Express to Microsoft SQL
Server?
A. Adding an
additional zone to the farm
B. Replicating the
data store to a second database server
C. Moving the data
store from local storage to SAN storage
D. Adding the
configuration logging database to the same SQL server
QUESTION NO: 8
Scenario: An administrator used
the Server Configuration Tool to install a Microsoft SQL Server
Express data store database
automatically as part of a XenApp 6.5 farm
installation. The initial
configuration consisted of a
single zone and servers in a single physical location. The
administrator added an equal
number of servers and users to the farm at a second physical
location over a WAN. Which action would require the administrator
to migrate the data store database from Microsoft SQL Server Express to Microsoft SQL
Server?
A. Adding an
additional zone to the farm
B. Mirroring the
SQL database to a second SQL server
C. Moving the
database from local storage to SAN storage
D. Adding the
configuration logging database to the same SQL server
QUESTION NO: 9
Scenario: An administrator used
the Server Configuration Tool to install a Microsoft SQL Server
Express data store database
automatically as part of a XenApp 6.5 farm
installation. The initial
configuration consisted of a
single zone and servers in a single physical location. The
administrator added an equal
number of servers and users to the farm at a second physical
location over a WAN. Which new requirement would require the
administrator to migrate the data store database from Microsoft SQL Server
Express to Microsoft SQL Server?
A. Implementing
database mirroring
B. Adding an
additional zone to the farm
C. Moving the
database from local storage to SAN storage
D. Adding the
configuration logging database to the same SQL server
QUESTION NO: 10
Scenario: A XenApp
Administrator in an enterprise environment plans to use Access Gateway to
secure ICA
connections from the external network. The Access Gateway is in the DMZ using
ICA
proxy mode. Which two locations for these components
would be the most secure?
(Choose two.)
A. Place the XML
broker in the DMZ.
B. Place the Web
Interface in the DMZ.
C. Place the XML
broker in the internal network.
D. Place the Web
Interface in the internal network.
QUESTION NO: 11
Scenario: A XenApp
Administrator in a small environment plans to use Access Gateway to secure ICA
connections from an external network. The Access Gateway is in the DMZ in ICA proxy
mode. The environment requires minimum
configuration to secure connections from the Web Interface server to the XML
broker server. Where should the
administrator place the Web Interface server and XML broker?
A. On one server
and place the server in the DMZ
B. On separate
servers and place the servers in the DMZ
C. On one server
and place the server in the internal network
D. On separate
servers and place the servers in the internal network
QUESTION NO: 12
In order for the Web Interface
server to correctly work with the Access Gateway Enterprise Edition configuration
in the attached exhibit, the administrator must configure the
authentication point at
__________. (Choose the correct option to complete the sentence.)
A. LDAP
B. RADIUS
C. the Web Interface
D. the Access
Gateway
QUESTION NO: 13
Which two methods can an
administrator use to configure Web Interface in high availability mode? (Choose two.)
A. Windows Cluster
services
B. NetScaler Load Balancing feature
C. Windows Load
Balancing services
D. NetScaler Access Gateway feature
QUESTION NO: 14
A XenApp
Administrator plans to use Citrix NetScaler to load
balance Web Interface servers.
Which persistence setting should
the administrator choose to correctly configure high availability for Web
Interface?
A. NOCE
B. DESTIP
C. SOURCEIP
D. COOKIEINSERT
QUESTION NO: 15
Scenario: A XenApp
Administrator of a 100-server farm needs to apply Citrix and vendor hotfixes on
a monthly basis, and a server restart is always required. The administrator
needs to automate this process but does NOT have a third party tool available. Which two tasks should the administrator
complete to guarantee that updates will be applied successfully?
(Choose two.)
A. Prohibit logons
and notify users.
B. Restart the
server and install hotfixes.
C. Apply
application load evaluators and notify users.
D. Log off all
users from servers and schedule a .EXE setup file
installation.
QUESTION NO: 16
Scenario: The Citrix
Administrator of a large farm needs to perform a health check after a
scheduled update window.
The health check should alert the administrator when the server is
unavailable to users. Which action must the administrator take to
perform a health check after a scheduled update window?
A. Use PowerShell
SDK scripts to verify the applied updates.
B. Use MFCOM to
check applied updates and enabled logons.
C. Use MFCOM
scripts to verify enabled logons and open Citrix ports.
D. Use PowerShell
SDK scripts to check enabled logons and open Citrix ports.
QUESTION NO: 17
Scenario: A new administrator
has been asked to ensure that all servers meet the minimum
required patching
level. A test server has been used to confirm that all patches can be deployed
to the production servers. Testing has identified that production servers are
NOT at the same patch level. Which
action can the administrator take to identify which patches are required on
each production server?
A. Use the Citrix
Computer policy wizard.
B. Use the Citrix AppCenter History node.
C. Use the Citrix AppCenter Configuration Tools node.
D. Use the Prepare
this server for imaging and provisioning task.
QUESTION NO: 18
Scenario: A XenApp
Administrator needs to deploy a small MSI package across all XenApp
servers. This package
requires a restart which needs to be scheduled to ensure that all servers do NOT
restart at once. Which action must the
administrator take to fulfill the requirement?
A. Set up
Installation Manager.
B. Configure
Health Monitoring and Recovery.
C. Create a
maintenance policy in the AppCenter console.
D. Use the XenApp Server Role Manager to install Installation Manager.
QUESTION NO: 19
Which component should an
administrator monitor to verify if the XenApp servers
are accepting ICA connections?
A. ICA Listener
B. Logon Monitor
C. Citrix IMA
Service
D. Citrix
Streaming Service
QUESTION NO: 20
A XenApp
Administrator needs to set up monitoring between a Web Interface server and the
backend XenApp servers. Which component should the administrator monitor?
A. ICA Listener
B. Citrix IMA
Service
C. Local Host
Cache
D. Citrix XML
Service
QUESTION NO: 21
Scenario: Some users in remote
offices complain that Citrix sessions are slow, and the network
administrator has asked the
Citrix Administrator to determine whether any data transmission errors are
occurring for a group of sample users. In this environment, EdgeSight,
Branch Repeater and Session Reliability are NOT used. How can the Citrix Administrator determine
the extent of data transmission errors based on the sample users?
A. Configure
Multi-Stream for sample users.
B. Open the Citrix
Connection Center for sample users.
C. Enable ICA round trip calculators for idle connections for sample
users.
D. Change the
active session limit to something other than Never in the ICA-TCP settings.
QUESTION NO: 22
Scenario: A user reports that a
hosted desktop session is sporadically slow. To assess the
problem, an
administrator reviews the Client Connection Status of the user and observes the
information displayed in
the attached exhibit. Click the Exhibit
button to view the attached exhibit.
What can the administrator
assess about the network based on the information in the exhibit?
A. ICA network
traffic is functioning normally.
B. The white
receive bar indicates there is a problem receiving data.
C. Incoming data
is constrained as evidenced by the number of incoming versus outgoing frames.
D. Outgoing data
is constrained as evidenced by four times the number of incoming bytes/frames.
QUESTION NO: 23
Scenario: A remote user has
reported that published applications are occasionally slow or choppy. The administrator thinks that it may be a
network issue, and requests that the user send a
Client Connection Status screenshot which is shown in the attached exhibit. Click the Exhibit button to view the attached
exhibit. Which conclusion can the
administrator make based on the information in the attached exhibit?
A. ICA network
traffic is functioning normally.
B. The white bar indicates that
there may be a problem with incoming data.
C. Outgoing data is constrained
as evidenced by the number of bytes/frame.
D. An older version of the
Citrix Receiver may be causing ICA traffic to function less optimally.
QUESTION NO: 24
Scenario: A network team is
deploying a proxy server to a specific remote site in order to improve security
and performance of the remote site. All traffic must pass through this proxy
server when the new infrastructure goes live. The administrator must ensure
that this happens automatically when a user logs on to the server through their
client device following the upgrade. To
ensure centralized configuration of the appropriate proxy server for the site,
the administrator must enable the 'Configure Client Proxy Settings' setting in
the ICAClient template and apply it to the site
__________.
(Select the correct option to
complete the sentence.)
A. OU
B. user group
C. computer group
D. default domain
controller
QUESTION NO: 25
Scenario: When users attempt to
connect to a XenApp resource, they are often
presented with a warning asking if they want to overwrite the existing launch.ICA file. Users only experience this when using the
Intranet portal to connect to their XenApp resources.
An administrator has
identified that the
"Launch.ICA" connection file is NOT deleted
when a user disconnects or logs off from their session. Which tool should the administrator use to
ensure that the launch.ICA file is removed when a session
is disconnected or logged off?
A. Citrix AppCenter
B. ICA Listener
Configuration
C. Microsoft Group
Policy Editor
D. Citrix Web
Interface Management Console
QUESTION NO: 26
Scenario: A recent security
breach occurred in which a member of staff was able to copy company confidential
information onto a device which was then removed from company premises. A
Citrix Administrator has been instructed to disable client drive mapping when
staff using corporate issued domain-member laptops attempt to access XenApp resources. Which
section of the ICAClient.ADM template file must the
administrator configure to facilitate this
request?
A. Client Engine
B. User Experience
C. User
Authentication
D. Remoting Client Devices
QUESTION NO: 27
Scenario: A financial
application is hosted on two XenApp servers in a
worker group. Users report that they often have to click the published
application icon several times before they can
successfully launch it. An administrator notes that one of the servers
was removed from service due to hardware issues. The other server is fully functional, and it
has the necessary resources to handle all the users' connections. What could be a reason why users have to
attempt to start the application multiple times before they are successful?
A. Multi-Stream
Connections has been enabled.
B. A custom load
evaluator incorporates load throttling.
C. Session
Reliability has been disabled for remote users.
D. Pass-through
authentication is NOT enabled for users accessing through the Citrix Receiver
Enterprise.
QUESTION NO: 28
Scenario: Users access several
published applications, and they report that the logon process
initiates each time an
application is accessed. Upon reviewing the published application settings, the
administrator sees the information in the attached exhibits. Click the Exhibit button to view the attached
exhibits. Use the tabs to switch the displayed exhibit.
Which setting should be adjusted
so that users will experience an improvement in their existing
session?
A. Pre-launch
B. Color depth
C. Maximize at
startup
D. One instance
for each user limit
QUESTION NO: 29
An administrator pulls the ICA
Session Round Trip Time report in the attached exhibit from
EdgeSight. Click the Exhibit button to view the attached
exhibit. What can the administrator
deduce about the user experience?
A. USB devices
cannot be redirected for all of these users.
B. For Users 15, 2
and 14, USB devices cannot be redirected.
C. HDX Flash
configured through default settings will run on the server.
D. HDX Flash
configured through default settings will run on the client device.
QUESTION NO: 30
Scenario: A member of the help
desk team forwards a call to a Citrix XenApp
Administrator to help a user who is currently experiencing difficulties
accessing data from an application. The response times seem slow. The
administrator is using the EdgeSight "Process
Performance Summary by Process" built-in report and obtains the report
which is displayed in the attached exhibit.
Click the Exhibit button to view the attached exhibit. What could cause the slow application
performance issue based on the report in the attached exhibit?
A. The application
is hanging.
B. The application
is CPU intensive.
C. The application
is memory intensive.
D. The application
is experiencing a network issue.
QUESTION NO: 31
Scenario: An administrator for a
new Citrix XenApp 6.5 farm is providing a hosted
desktop to
users. The new EdgeSight implementation will NOT support XenDesktop or endpoints.
Which two default alerts should the administrator delete so that only XenApp relevant alerts are
configured? (Choose two.)
A. Heartbeat
Halted
B. VDA Failed to
Start
C. Desktop
Registration Failed
D. IMA Service is
Unresponsive
E. Farm Data Store
Connection Failed
F. Configuration
Logging Database Unavailable
QUESTION NO: 32
An administrator can use
Microsoft Excel with Citrix EdgeSight to provide
__________ report.
(Choose the correct option to
complete the sentence.)
A. a real-time
B. a network latency
C. the XenApp user summary
D. an Online
plug-in version list
QUESTION NO: 33
Scenario: An administrator
deployed a new application on all the XenApp servers.
The
administrator needs to set
up an alert to be notified if the application process takes up all the CPU time
and RAM on the XenApp servers. Which alert must the administrator configure?
A. Thrashing
application
B. Application
performance
C. High
application resource usage
D. Health
Monitoring and Recovery Action Failure
QUESTION NO: 34
A XenApp
Administrator would like to centrally deploy a plug-in using Merchandising
Server.
Which two steps should the
administrator take to achieve this? (Choose two.)
A. Download the
plug-in to the client.
B. Create
deliveries to deploy the plug-in.
C. Create an MSI package
to deploy the plug-in.
D. Download the
plug-in to Merchandising Server.
QUESTION NO: 35
Scenario: Configuration logging
was successfully configured with default values. Recent
administrative changes to the
XenApp farm have NOT been logged to the configuration
database. Technicians determined that
the SQL server hosting the database had an issue that has since been resolved.
Administrative changes are now being logged again. What should the administrator modify in the
configuration logging properties in order to ensure that administrative changes
are only allowed when configuration settings are logged?
A. Check
"Configure backup database…"
B. Check "Log
administrative tasks to Configuration Logging database."
C. Uncheck
"Allow changes to the farm when logging database is disconnected."
D. Check
"Require administrators to enter database credentials before clearing the
log."
QUESTION NO: 36
Scenario: An administrator has
added an additional XenApp server to an existing zone
in
preparation for an
expected period of bad weather disruption. This is to ensure that additional
load can be managed. This server has been prepared from an existing clone with
changes made in accordance with company policy. Once the new server has been
brought online, Edgesight alerts appear indicating
"Zone Data Collector Election Triggered." An investigation shows that
the new server is now the data collector for the zone. The administrator has searched in the
configuration log file and viewed the history using Citrix AppCenter. Which setting needs to be changed to return
the data collector to the original server?
A. Load evaluator
B. Zone default
setting
C. Load balancing
policy
D. Worker group
membership
QUESTION NO: 37
Scenario: An administrator
deployed Remote Desktop roaming user profiles within an existing
XenApp farm. As part of the
transition to XenApp 6.5, Citrix Profile Management
will replace the existing profile solution for XenApp
user sessions. Which two components must
the administrator modify in order to implement this solution? (Choose two.)
A. Web Interface
B. XenApp server
C. Citrix License
Server
D. Active
Directory GPOs
QUESTION NO: 38
Which two features can an
administrator configure to reduce user profile load time?
(Choose two.)
A. Folder
redirection
B. Session PreLaunch
C. Citrix Profile
Management
D. Remote Desktop
roaming profiles
QUESTION NO: 39
Scenario: An existing XenApp 6.5 server farm has two policies. The first policy is called "Clipboard_On" and has a priority of 1. The Client
Clipboard redirection setting is configured to 'Allow' and it is configured in
the Unfiltered policy.
The second policy is called "Clipboard_percent"
and has a priority of 2. The Clipboard redirection bandwidth limit percent
setting is configured to 25% and is applied to all domain users. The policies are stored in the Citrix data
store and no additional Active Directory policies are configured. After some
time, the administrator detects that users are sometimes unable to use clipboard
mapping. How can the administrator
configure the environment so that users are always able to use clipboard
mapping in this environment?
A. Change the
priority order of the two policies.
B. Ensure that all
users have an ICA client newer than version 11.2 installed.
C. Configure the
Web Interface to use Workspace Control for all domain users.
D. Ensure that the
ICA connection settings are the same between the XenApp
6.5 servers.
QUESTION NO: 40
Scenario: An administrator needs
to provide quick access and a fast experience for a group of
users when they
access one important application. These users are members of a group called
CTX-VIP. How can the administrator configure the
environment to ensure that these users will have the experience that they need
when they use the important application?
A. Profile and
stream the important application for the CTX-VIP group to the XenApp servers.
B. Enable the
Preferential Load Balancing policy, assign a High
session importance for group
CTX-VIP and set the application importance
for this application.
C. Configure the
Citrix User policy setting to assign more CPU for this group and configure the
Computer policy
enabling the fair sharing of CPU between sessions.
D. Create a load
evaluator with low CPU threshold, assign for the group CTX-VIP and configure a
Computer policy with
Preferential Load Balancing enabled for this group.
QUESTION NO: 41
An administrator is configuring
a XenApp 6.5 farm that has the default printer
settings still in place. Which
configuration would require the administrator to make a change to the default
printer settings?
A. Auto-create all
client printers.
B. Auto-install
native printer drivers.
C. Do not use
Universal printing compression.
D. Only use
Universal printing if the requested driver is unavailable.
QUESTION NO: 42
Scenario: An administrator is
configuring a XenApp 6.5 farm that has the default
printer settings
still in place.
Users at a branch office connect to the Citrix farm with an average bandwidth
of 2048 Kbps. Which configuration can
the administrator make to ensure that the maximum bandwidth allowed for
accessing client printers does NOT exceed 1024 Kpbs?
A. Create a new
Citrix User policy with "Multi-stream Connections" enabled.
B. Create a new
Citrix User policy with "Printer redirection bandwidth limit percent"
set to 50.
C. Create a new
Citrix User policy with "Printer redirection bandwidth limit" set to
1024 Kbps.
D. Create a new
Citrix User policy with "LPT port redirection bandwidth limit" set to
1024 Kbps.
QUESTION NO: 43
As part of a migration from XenApp 5 to XenApp 6.5, a company
plans to migrate existing
published application
data to the new farm. Which tool should
an administrator use to complete the migration?
A. XenApp Prep Integration Tool
B. XenApp Server Role Manager
C. Citrix XenApp Migration Center
D. Citrix AppCenter in the target farm
QUESTION NO: 44
Scenario: An administrator needs
to increase the number of XenApp 6.5 servers in the
current
farm to increase
capacity for disaster recovery. A number of XenApp
6.5 servers already exist;
these were used for
a proof of concept (PoC) farm. These servers have the
same OS, XenApp
version and
applications as the production farm. Which
tool should be used to migrate the PoC
servers into the production farm?
A. Citrix XenApp Migration Center
B. Citrix AppCenter in the target farm
C. Citrix AppCenter in the source farm
D. Citrix XenApp Server Role Manager
QUESTION NO: 45
Click the Exhibit button to view
the attached exhibit. Which two
resources are required to set up a full disaster recovery site to handle Citrix
user profiles
based on the scenario in the attached exhibit? (Choose two.)
A. DFS namespaces
B. Referrals to
Multiple Folder Targets
C. Multiple folder
targets and DFS Replication
D. Failover
clusters for hosting individual folder targets
QUESTION NO: 46
Scenario: An administrator is
migrating from XenApp 5 on Windows Server 2003 to XenApp 6.5 on Windows Server 2008 R2. All applications have
been successfully moved except for one which requires Windows Server 2003. The
application that requires Windows Server 2003 needs to be available to users. Which action should the administrator take to
meet the needs of this scenario?
A. Run CHFARM on
the XenApp 5 server.
B. Configure Web
Interface to present applications from both farms.
C. Stream the
application that requires Windows Server 2003 to the new XenApp
6.5 servers.
D. Use the Citrix XenApp Migration Center to migrate the published application
data to XA 6.5
QUESTION NO: 47
Scenario: An administrator has a
single XenApp 6.5 farm with an equal number of
servers in two
datacenters. Datacenter 1
is used for production and Datacenter 2 is used for disaster recovery
failover. Users should
connect to the XenApp servers in Datacenter 2 only if
all servers in
Datacenter 1 are
offline or are running a full load. Which
two steps should the administrator take to meet the requirements? (Choose two.)
A. Create a
preferential load balancing policy.
B. Create and
assign a custom load evaluator at each datacenter.
C. Create an OU, a
worker group and a zone for each datacenter's servers.
D. Create a Citrix
load balancing policy with appropriate worker group preference settings.
QUESTION NO: 48
Scenario: An administrator
wishes to add disaster recovery capability to an existing XenApp
environment. The
administrator built some new servers into a disaster recovery datacenter that
has a 1 GB link to
the production datacenter. How should
the administrator configure the new servers for users?
A. Add the servers
to the existing farm in the same zone and use a custom load evaluator.
B. Add the servers
to the existing farm in the same zone and use a worker group and load
balancing policy.
C. Add the servers
to a new farm and use the site failover feature of Web Interface to provide
access to the
servers.
D. Add the servers
to the existing farm into a new disaster recovery zone and use a preferential
load balancing
policy.
QUESTION NO: 49
Scenario: The Senior Citrix
Administrator has requested that a Junior Administrator deploy two
XenApp servers using
a base XenApp image that he previously created. The servers
will be
assigned to two
different departments with additional applications that will be installed later
based on department requirements. What
should the Junior Administrator do to meet these requirements?
A. Manually
install XenApp on the new XenApp
servers.
B. Clone the base XenApp image and deploy to new XenApp
servers.
C. Use Windows
Deployment Services to deploy XenApp to new XenApp servers.
D. Use
Provisioning Services to stream XenApp servers in
standard mode to new XenApp
servers.
QUESTION NO: 50
A Citrix XenApp
Administrator needs to create a load balancing policy and apply it to several
XenApp servers. Which two methods would require the
administrator to use the least amount of effort to meet the requirements?
(Choose two.)
A. Create a worker
group and add targeted servers to it.
B. Create a load
balancing policy and assign it to targeted servers.
C. Create a load
balancing policy and assign it to the worker group.
D. Create a worker
group and attach the load balancing policy to XenApp
servers.
QUESTION NO: 51
Scenario: An administrator needs
to configure scheduled restarts for half the farm at 1:00 pm and the other half
at 2:00 pm. All the servers reside in the same OU. Which two actions should the administrator
take to meet the requirements of the scenario?
(Choose two.)
A. Go to the
servers in AppCenter, and use the Logon Control
options.
B. Create worker
groups named 1PM and 2PM, and add servers accordingly.
C. Create two
Citrix policies with settings to restart, and filter the policies by worker
group.
D. Create two GPOs
with settings to restart, and assign the GPOs to the OU containing the farm
servers.
QUESTION NO: 52
Scenario: Recently, the Access
Gateway Enterprise Edition (AGEE) Administrator configured
access for mobile
tablet devices and smartphones. Due to security concerns, the XenApp
Administrator is asked to
prevent these mobile devices from remotely accessing the published
application belonging to
the Finance department. The AGEE
Administrator provided the XenApp Administrator with
the following information:
Public URL: https://access.company.com
Virtual Server
IP: 192.168.195.20
Virtual Server
Name: ssl_vsrv_access
The following
policies and profiles are configured:
sess_pol_default - default Session policy
sess_pol_mobile - session policy configured for mobile
devices
Click the Exhibit button to view
the attached exhibit.
Based on the attached exhibit,
the XenApp Administrator needs to configure the
__________ as
the Access Gateway
Farm. (Choose the correct option to complete the sentence.)
A. Public URL
B. Virtual Server
IP
C. Virtual Server
Name
D. Mobile Session
policy
QUESTION NO: 53
Scenario: A XenApp
Administrator has created a Citrix policy that designates maximum
compression to improve the
user experience for remote users. The
Access Gateway Enterprise Edition Administrator provided the following
information:
Public URL:
https://access.company.com
Virtual Server
IP: 192.168.195.20
Virtual Server NamE. ssl_vsrv_access
sess_pol_default - default Session policy
The XenApp
Administrator needs to configure the Access Control filter to ensure that the
policy
only applies to the
remote users and does NOT affect the internal users. The XenApp
Administrator needs to assign a (n) __________ filter and specify __________.
(Select the correct option to
complete the sentence.)
A. Client Name;
the Virtual Server Name
B. Group; the
remote users security group
C. Client IP;
192.168.195.20 as the client IP address
D. Access Control;
the virtual server name and session policy name
QUESTION NO: 54
When application App123 is
configured for Session PreLaunch, what change is made
to the
environment?
A. File type
associations are updated.
B. Maximum concurrent
instances is set to 1.
C. A new
application named PreLaunch-App123 is created.
D. Maximize at
startup is enabled within the published application properties.
QUESTION NO: 55
Scenario: A large number of
users log on to the XenApp 6.5 farm every weekday
morning at 8:00 am. An administrator decides to configure Session PreLaunch in this environment.
Which additional impact will
this configuration have on the environment?
A. If changes are
required to the published application, it must be recreated.
B. Users will
consume a Citrix license even when no user sessions are open.
C. A one instance
limit is automatically invoked within the application properties.
D. Application
user load based on this application cannot be used within a load evaluator.
QUESTION NO: 56
An administrator plans to enable
session linger in a Citrix XenApp 6.5 farm. What will be the impact on the user
experience?
A. Sessions will
remain in an idle state until the user relaunches it.
B. Sessions will
be disconnected then logged off in the background.
C. Sessions will
start automatically when a user logs on to the farm.
D. Sessions will
remain alive for a configurable period before termination.
QUESTION NO: 57
After an administrator restarts
a XenApp server, the XenApp
Administrator notices that the IMA
Service is NOT starting. Which two components could be causing the
issue? (Choose two.)
A. RPC Service
B. Local host
cache
C. Citrix
Streaming Service
D. Remote Desktop
Service
QUESTION NO: 58
Scenario: A XenApp
Administrator changed the credentials used to connect to the data store. The IMA
Service is NOT starting after the restart.
Which component could be causing this?
A. Roaming profile
B. Local host
cache
C. Citrix XML
Service
D. ODBC/DSN
Configuration
QUESTION NO: 59
Scenario: Users from the Financial department need access to a critical application
in order to
interact with a bank
Web site. This application requires Microsoft Office, which is NOT already
present on the XenApp servers. The Citrix XenApp
Administrator decided to stream the
application. The
administrator installed the application into a package, but notices that the
application installed a
driver and created a service. The installation needs to be restarted.
What could be a problem while
trying to profile this application?
A. HTTP delivery
for application streaming is NOT configured.
B. The application
depends on Microsoft Office, which is NOT installed.
C. The service
creation, because it is NOT possible to stream a service.
D. The drivers'
installation, because it is NOT possible to stream a driver.
QUESTION NO: 60
Scenario: A Citrix XenApp Administrator plans to integrate a new application.
This application is
profiled to be streamed
to a group of users and will be published to be streamed to the client.
Some users are able to launch
the streamed application but a few of them are NOT able to do so. What could cause this issue?
A. The
administrator did NOT install Citrix Receiver.
B. The
administrator did NOT configure Citrix Receiver.
C. The
administrator did NOT install the Citrix Offline Plug-in.
D. The
administrator did NOT configure the Citrix Offline Plug-in.
QUESTION NO: 61
Scenario: The XenApp Administrator is using application streaming to
provide users with access to their applications. A user reports that after
launching a streamed application, the application hangs during launch. Which step should the administrator take
first to resolve the issue?
A. Flush the RADE
cache.
B. Reprofile the application.
C. Enable
Inter-Isolation Communication.
D. Update Citrix
Receiver to the latest version.
QUESTION NO: 62
Scenario: A XenApp
Administrator is using Provisioning Services to deliver XenApp
servers in
standard mode that
utilize streamed applications. The administrator noticed excessive amounts of network
traffic when users launch streamed applications and users report frozen
sessions
occasionally. How should the administrator address the
issue?
A. Cache the
application at launch time.
B. Deploy App-V
for application streaming.
C. Deploy the
application locally through SCOM.
D. Pre-cache the
streamed application before capturing the vDisk.
QUESTION NO: 63
Scenario: An administrator has
enabled a Citrix policy called HDX Policy that enables extra
compression for moving and
still images for user connections greater than 400 Kbps.
Branch Repeater VPX is then
deployed to all remote offices; however, users report NO
appreciable benefits. Which change should be made to HDX Policy?
A. Session
Reliability should be disabled.
B. The Branch Repeater filter should be invoked.
C. Overall session
bandwidth should be added to the policy.
D. The threshold
value should be increased by 100-200 Kbps.
QUESTION NO: 64
Scenario: A company has hired
100 new call center agents at a remote office that will access
XenApp applications. The WAN link
upgrade will NOT be completed for several months, so
maximum compression
settings have been enabled for all call center users. Call center users now report that the user
experience is worse. Upon researching the issue, the administrator sees that
bandwidth utilization has been reduced to less than 70% on average. What is causing the poor user experience?
A. XenApp CPU utilization
B. XenApp memory utilization
C. Client disk
space utilization
D. Server disk
space utilization
QUESTION NO: 65
Scenario: A Citrix XenApp Administrator configured the audio quality to low in
a Citrix Group Policy Object and applied it to all the XenApp
servers in the farm. A few weeks later, another
administrator from the team
created an OU Group Policy Object and set the audio quality to high. The administrator applied the policy object
to the OU that contains all the XenApp servers in the
farm. What would be the audio quality
for all the XenApp servers using precedence for the
resultant policy?
A. The audio
quality will change every week after the weekly restart phase.
B. The audio on
all the XenApp servers in the farm will be set to low
quality.
C. The audio on
all the XenApp servers in the farm will be set to
high quality.
D. Some servers
will be set to use low quality audio, and the others will be set to use high quality
audio.
QUESTION NO: 66
Scenario: A Citrix XenApp Administrator asked the Active Directory team to
implement a new OU Group Policy Object to enable the Session Reliability
feature. Another administrator needs to change the Session Reliability port
number due to incompatibility with a financial application. To do so, the XenApp Administrator is creating a new Citrix Group Policy
Object to set the value of the Session Reliability port number to TCP 2599. What will be the resultant policy on the XenApp servers?
A. Session
Reliability will be enabled, and the port number will be set to TCP 2599.
B. Session
Reliability will NOT be enabled, but the port number will be set to TCP 2599.
C. Session
Reliability will be disabled and the port number will remain in the default
setting
(TCP 2598).
D. Session
Reliability will NOT be enabled, and the port number will remain in the default
setting (TCP 2598).
QUESTION NO: 67
Scenario: A XenApp
Administrator implemented the pre-launch feature for a corporate email
application. As the
administrator monitors users' sessions in the AppCenter,
the administrator
notices that no
pre-launch sessions are being created. Application launch time continues to
remain high. What are two reasons why
pre-launch sessions are NOT being created?
(Choose two.)
A. One of the
Citrix XenApp servers is reporting a full load.
B. Endpoint
devices are NOT using the latest Citrix Receiver version.
C. The
administrator did NOT create a pre-launch published application.
D. XenApp Enterprise Edition licenses are being used in the
environment.
QUESTION NO: 68
Scenario: A XenApp Administrator enabled session linger through
policies and chose the values in the attached exhibit. Many users are
complaining that when they choose to relaunch a
published application, the full logon process is initiated. Click the Exhibit button to view the exhibit. What could be the reason for this behavior?
A. The Linger Terminate Timer Interval policy value is too long.
B. The Linger Terminate Timer Interval policy value is too short.
C. The Linger Disconnect Timer Interval policy value is too long.
D. The Linger Disconnect Timer Interval policy value is too short.
QUESTION NO: 69
An administrator is attempting
to view information about a server process from the AppCenter
console which is
displayed in the attached exhibit. Click
the Exhibit button to view the attached exhibit. Which communication process is
malfunctioning?
A. ICA
B. IMA
C. SSL
D. XML
QUESTION NO: 70
Scenario: A XenApp
farm has two servers. The administrator discovers that users are only being
directed to one server.
The administrator investigates the issue and receives the output in the
attached exhibit. Click the Exhibit button to view the attached
exhibit. What is the reason that users
are only being directed to one server?
A. There is an IMA
communication problem.
B. There is an XML
communication problem.
C. An EdgeSight update is currently in
progress.
D. The problem
server cannot contact the data store.
QUESTION NO: 71
Scenario: The XenApp farm consists of two zones each located in a
different datacenter. Last
night, the network
team conducted maintenance on the firewalls and this morning, the
administrator discovers that
load balancing is NOT working. The administrator asks the network
team for a copy of
the firewall rules. A few lines of the firewall rules are shown below.
access-list 102 deny tcp any any eq 2512
access-list 102 deny tcp any any eq 1494
access-list 102 permit tcp any any eq 2598
access-list 102 permit tcp any any eq 80
access-list 102 permit tcp any any eq 1433
access-list 102 permit tcp any any eq 1161
What is most likely the cause
for the load balancing issues?
A. There is an IMA
communication problem.
B. There is an XML
communication problem.
C. There is a data
store communication problem.
D. There is a
Session Reliability communication problem.
QUESTION NO: 72
Scenario: The XenApp farm consists of two zones, each located in a
different datacenter. After
some recent
maintenance by the network team, the administrator discovers that the load
balancing across the
datacenters is NOT working. The most
likely cause for the load balancing issue is that the firewall has started
blocking the __________.
(Complete the sentence with the
correct option.)
A. IMA traffic
between the datacenters
B. XML traffic
between the datacenters
C. data store
traffic between the datacenters
D. Session
Reliability traffic between the datacenters
QUESTION NO: 73
Scenario: A XenApp
Administrator noticed an issue that is affecting all XenApp
servers in a farm.
The local host cache of each
server is too large for the system drive, and it causes IMA Services
to stop. The
administrator attempted to restart the IMA Service, and the error in the
attached
exhibit occurred. Click the Exhibit button to view the
attached exhibit. Which option could
explain the cause of the issue?
A. The data store
is corrupt. The administrator needs to restore the local host cache, restart
all the servers and restore the latest data store backup.
B. The data store
is corrupt. The administrator needs to restore the latest data store backup,
recreate the local host
cache and restart all the servers.
C. The local host
cache is corrupt. The administrator needs to restart all the servers, recreate
the local host cache and restore the latest data collector backup.
D. The local host
cache is corrupt. The administrator needs to force restore the latest data
collector backup,
recreate the local host cache and restart all the servers.
QUESTION NO: 74
Scenario: A Citrix XenApp Administrator notices that one Citrix XenApp server is hanging during
the weekly restart
phase. The IMA Service appears to hang during startup. Which two options could explain the cause of
the issue? (Choose two.)
A. The data store
is corrupt.
B. The local host
cache is corrupt.
C. The server
restarted only one time.
D. A data
collector election has occurred.
QUESTION NO: 75
Users complain that it is taking
longer to access applications now than it did last week.
What is the best way to
determine what changed from last week to this week?
A. Review
Configuration Logging data
B. Review EdgeSight troubleshooting data
C. Review EdgeSight Active Application Monitoring data
D. Review
published application properties from a previous version of the data store with
the
current version
QUESTION NO: 76
Users complain that their main
application, Mission-Critical App, takes longer to start than their
other applications. Click the Exhibit button to view a screenshot
of the properties of the mission critical application. Based on the published application properties
shown in the Exhibit, which two settings should be altered to decrease
application launch time? (Choose two.)
A. Pre-launch
B. Window size
C. Enable legacy
audio
D. Start without
printers
E. File type
associations
F. Maximum
concurrent instances
QUESTION NO: 77
Scenario: Pilot users have
reported that the Aero-like capabilities provided by Dynamic Windows Preview
within the XenApp 6.5 hosted desktop provides an
excellent user experience. However, it is NOT visible under all circumstances. What can the administrator do to correctly
deploy the Dynamic Windows Preview?
A. Install Citrix
Receiver 3.0 or higher.
B. Ensure a WAN
link of 30 ms or less.
C. Configure a
Pre-launch hosted desktop.
D. Require users
to only use Windows or Macintosh user devices.
QUESTION NO: 78
Scenario: Users report that
immediately after logging onto a hosted desktop, their sessions
disconnect. The
administrator enables auto-client reconnect logging in order to troubleshoot
the issue. Where are the logging events
retained?
A. Data store
B. Server system
log
C. EdgeSight database
D. Configuration logging
database
QUESTION NO: 79
Scenario: When configuring a Web
Interface site, an administrator configures port 8000 for Citrix XML Service
communications. During internal testing, the administrator sees that
application enumeration does NOT occur. Where
else does the administrator need to configure the Citrix XML Service port?
A. Farm properties
B. Citrix Computer
policy
C. Worker Group
properties
D. Citrix Receiver
properties
QUESTION NO: 80
Scenario: A group of users with
thin clients connect to a hosted desktop in XenApp
and then
launch their
published applications from within the desktop. When users log in to their
hosted
desktop, the dialogue
shown in the attached exhibit appears. Click
the Exhibit button to view the attached exhibit. Which two actions should the XenApp Administrator take to resolve this problem? (Choose
two.)
A. Install the
Citrix Single sign-on agent.
B. Verify that the
XenApp Services site is configured with pass-through
authentication.
C. Apply a Group
policy to the XenApp servers that uses the icaclient.ADM file and enable passthrough
for the Citrix Reciever.
D. Apply a Group
policy to the user workstation that uses the icaclient.ADM
file and enable passthrough for the Citrix Reciever.
QUESTION NO: 81
Scenario: Users access their
published applications through an Access Gateway Enterprise
Edition configured in ICA Proxy
mode. The XenApp Web site is configured as shown in
the first
exhibit. Since a change by the Junior Administrator,
remote users are experiencing issues while
connecting to any
published applications. Upon researching the issue, the XenApp
administrator notes that four different STAs are configured. These are shown in
the second exhibit. Click the Exhibit
button to view the attached exhibits. Use the tabs to switch the displayed
exhibit. Which URL should the
administrator retain?
A. http://XenApp01/scripts/ctxsta.dll
B. http://XenApp01.company.com/scripts/ctxsta.dll
C. http://XenApp01.company.com:443/scripts/ctxsta.dll
D. http://XenApp01.company.com:8080/scripts/ctxsta.dll
QUESTION NO: 82
Scenario: Currently users log in
to their desktop and are prompted several times for credentials
while accessing XenApp published applications. The XenApp
Administrator is asked to configure
pass-through authentication
to ensure that users only log in to their desktop and will NOT get
prompted anymore. Which three components will need to be
configured when setting up pass-through authentication? (Choose three.)
A. Web Interface
B. ICAClient.ADM
C. Citrix Receiver
D. XenApp Servers
E. Citrix User
policy
F. Citrix Single
sign-on
QUESTION NO: 83
Scenario: A XenApp
Administrator has configured Multi-stream ICA in an environment. A user
reports performance
issues and the administrator discovers that Multi-stream ICA is NOT active
for that user's
session. What should the administrator
do to resolve this issue?
A. Change the
color quality to 16-bit.
B. Ensure that
port 1494 is available.
C. Adjust the
progressive compression level.
D. Upgrade to the
latest version of Citrix Receiver.
QUESTION NO: 84
A user reports that he has a
poor Internet connection, and his sessions are constantly dropped.
Which two actions should the XenApp Administrator complete for the user's session to
avoid the issue described? (Choose two.)
A. Disable sound.
B. Disable printer
mapping.
C. Enable CPU
Optimization.
D. Disable Session
Reliability.
QUESTION NO: 85
Scenario: An administrator is
deploying a new server to host the latest Citrix Web Interface
version. During a
test, the administrator has NOT been able to authenticate and access the list
of published applications. Which two
actions must the administrator take to debug the Citrix Web Interface? (Choose
two.)
A. Specify a valid
path to generate a log file.
B. Edit the web.config file to enable the debug feature.
C. Use the Process
Monitor tool to monitor the IIS processes.
D. Use the Windows
Debug tool to generate and analyze a memory dump.
QUESTION NO: 86
An executive is connecting to
the corporate XenApp Web Interface site and clicks on
the published application he wishes to use, but nothing happens. What could be causing the issue?
A. The Web Interface site is NOT configured properly.
B. One XenApp server is NOT able to process the request.
C. The published
application references included in the ICA file are NOT valid.
D. The zone data
collector is too busy to process the launch application request.
QUESTION NO: 87
Call center users accessing a XenApp hosted desktop by means of thin client devices are
unable
to see a new
multi-function printer in their session.
What can the administrator do to resolve this?
A. Enable the
auto-create all client printers policy.
B. Add the new
printer to the session printers policy.
C. Install the
correct printer drivers on the XenApp servers.
D. Verify that the
new printer has been added to the default printer policy.
QUESTION NO: 88
Users accessing a XenApp hosted desktop by means of thin client devices can
see a new network printer that has been provisioned by the administrator using
the session printers policy but are unable to print to
this printer. What can the administrator
do to resolve this?
A. Enable the
auto-create all client printers policy.
B. Add the new
printer to the session printers policy.
C. Verify that the
new printer has been added to the default printer policy.
D. Install the
correct printer driver on the XenApp servers and the
print server.
QUESTION NO: 89
When engineering users from the
Miami office print from a published CAD application, most office users
experience decreased performance. How
can the XenApp Administrator prevent such
degradation?
A. Configure the
Multi-stream User policy.
B. Limit the
bandwidth used by client printing.
C. Specify the
Printer Properties Retention policy.
D. Set the Printer
Redirection Bandwidth Limit Percent policy to 90.
QUESTION NO: 90
Scenario: All users connect from
thin clients to a XenApp hosted desktop. Recently,
the Order
Entry team has been printing all
documents in color. A session printers policy has been
created
and applied to
this user group. How can the XenApp Administrator ensure that these printers default to
a setting of monochrome?
A. Modify the
Printer Properties Retention Policy.
B. Change the
universal driver preference policy to default to PCL4.
C. Modify the
existing session printing policy with the required printer settings.
D. Adjust the
Citrix Universal Printer default settings in the registry of the XenApp servers.
QUESTION NO: 91
Scenario: When users connect to
their published applications, the printers configured on their
workstation are mapped in
their XenApp sessions. During an investigation around
performance
problems, the
administrator discovers that a high amount of printer drivers are being
installed on the XenApp servers. What can the administrator do to prevent this
from happening?
A. Disable the
Auto-create client printers policy.
B. Configure the
Auto-create generic universal printer policy.
C. Configure the
Automatic installation of native printer drivers
policy.
D. Configure the
Universal Printer Driver in the Printer driver mapping and compatibility
policy.
QUESTION NO: 92
Scenario: A Citrix XenApp 6.5 environment contains user devices, a Web Interface
site and a
XenApp server farm
with 27 XenApp 6.5 servers. Users complain that they can log on, see
published applications and start the applications but no ICA connection is
established. Which two options can the
administrator configure in this environment so that the users can establish
their ICA sessions? (Choose two.)
A. Open the IMA
port on all of the XenApp 6.5 servers.
B. Open the ICA
port on all of the XenApp 6.5 servers.
C. Open the
Session Reliability port on all of the XenApp 6.5
servers.
D. Open the http
port between the user device and the Web Interface site.
E. Open the XML
port between the Web Interface site and the data collector.
QUESTION NO: 93
Scenario: A Citrix XenApp 6.5 environment contains several published
applications. All of the
published applications
are installed on every XenApp 6.5 server and a
customized load evaluator is assigned to two worker groups where the servers
are grouped. The users connect from the Local Area Network (LAN) and normally
they can work without problems. Users
complain that sometimes the ICA sessions are very slow. How can the administrator determine which
user session consumes the most server resources?
A. Utilize the
PowerShell SDK to monitor server processes.
B. Run an EdgeSight report to determine which processes have the
highest values.
C. Create a new
load evaluator and assign it with a new policy to the existing worker groups to
determine which
processes have the highest values.
D. Create a new
Health Monitoring policy to send an alert for sessions when they reach a
threshold value for
processing speed to determine which processes have the highest values.
QUESTION NO: 94
Scenario: The “Xirtic” Citrix environment consists of two datacenters:
Tokyo and Seoul. Servers in the
environment are
categorized into worker groups: Engineering Apps and Office Productivity Apps. There are total of four servers in the
environment. The various offices are on
the following subnets:
Tokyo
192.168.1.0/24
Seoul
172.16.1.0/24
The XenApp
servers can be accesses internally or externally using the following FQDNs:
Information about application
access and usage:
Engineering
users need access to the Design Project application.
Engineering users must access the application through Web
interface while on the corporate network and from remote locations.
Engineering
users access both published and streamed applications.
Information about security:
A corporate policy mandates that separate sites are created
Tokyo Engineering users and Seoul Engineering users.
Management also wants to address
given to the client to be determined by the address
translation mappings in
Web Interface. The public domain name is
“Xirtic.com” and the internal domain name is “Xirtic.local”. All server hostname are the same internally
and externally.
Tasks:
As the XenApp Administrator,
configure the necessary settings in the Web interface Management Console to
meet the requirements specified by the Xirtic
management team.
Answer: Here are
the step by step solution to this.
Explanation:
Web Interface
without CAG/CSG
Tokyo Site
(External)
Click Next
Click Next
Click Next
Click Next
Enter Citrix
Farm Name, Citrix XenApp server in Tokyo and the XML
port configured
Click Next
Click Next
Click Next
Click Next
Click Finish
Configuring
Access Translation on the Web Interface
Click on Secure
Access
Select
Translated (Translating Firewall is used)
Enter the public IP that is NATted
to XenApp Server (Do this step for both XenApp servers and Port 2598)
Looks like
this,
Click Finish
Do the same
steps on Seoul Web Interface For Internal Websites:
Internal –
http://<servername>/Tokyo-Internal and
http://<servername>/Seoul-Internal
External –
http://<servername>/Tokyo and http://<servername>/Seoul
QUESTION NO: 95
Scenario: In the Xirtic call center environment, the IT team needs to have
an easy way to
dynamically provision the XenApp servers and streamline the application publishing
process. The IT team also needs to ensure that users are able to access the
best available resources when they connect to the environment. All the XenApp
servers are currently in a computer OU named XenApp
Servers.
Tasks:
1. Create a worker group named XenApp Servers.
2. Create a Load evaluator
3. Assign the load evaluator to
the XenApp Servers worker group.
4. Provide the Active Directory
Security Group named “Call Center Users” with a published desktop of XenApp server. Name the published desktop “Call Center
Users”.
(No answer given… you’ll have to “wing
it” on this one…)
QUESTION NO: 96
In the Xirtic
XenApp 6.5 farm, there are two servers in each of the
two datacenters.
Information
about the Tokyo datacenter:
The Tokyo datacenter is the production
site.
It contains the XTXATY01 and XTXATY02
servers.
All Engineering users are located in
Tokyo.
Information
about the Seoul datacenter:
The Seoul datacenter is used as the
disaster recovery and failover site.
It contains the XTXASL01 and XTXASL02
servers.
Requirements:
The design of the environment
mandates the engineering users should only connect to the
XenApp servers in the
Seoul datacenter if all servers in the Tokyo datacenter are offline or fully
utilized.
Tasks:
1.
Configure the minimum number of worker groups necessary to
meet the requirements as specified in the scenario. Use the following naming
conversation: WorkGroup1, WorkGroup2.
2.
Configure the minimum number of policies necessary to meet
the requirements as
specified in the
scenario. Use the following naming connection: Policy1, Policy2.
(No answer given… you’ll have to “wing
it” on this one…)
QUESTION NO: 97
CORRECT TEXT
Scenario: A Citrix Administrator
in the Xirtic environment has configured a new XenApp farm with three serves and plans to add more servers
to the farm at a later time. The administrator wants to configure the XenApp environment so that additional servers can be added
with reduced effort.
Applications published in the
environment are distributed on servers in the following ways:
XTXATY01:
Microsoft Office
XTXATY01: CRM
XTXASL01:
Microsoft office and CRM
Tasks:
Create the least amount of
worker groups necessary to ensure new servers added to the farm are automatically
assigned to specific application workloads. Use the following naming
convention:
WorkGroup1
WorkGroup2
(No answer given… you’ll have to “wing
it” on this one…)
QUESTION NO: 98
CORRECT TEXT
Scenario: In configuration with
the Network Administrator, a XenApp Administrator at Xirtic: has noticed that connection to all hosted
applications with the current XenApp farm are experiencing slowness and intermittent
failure at specific times of the day when network bandwidth is near capacity.
The XenApp Administrator is setting up a new 6.5
Proof of Concept environment and has decided to examine whether prioritizing
ICA traffic will improve the experiences for users connecting across the
network to the server in the Office Productivity worker group.
Information about the current
environment:
The XTXATY02
and XTXAsL01 servers are in the Office Productivity group.
The XTXATY02
and XTXAsL01 are also on the 10.10.32.0/16 subnet.
The XTXATY02
and XTXAsL01 servers are in the Engineering Apps worker group.
The Network Administrator has
configured the route to allow the flow of traffic over ports 2598
and 2599. All administration of the farm occurs in the AppCenter Console.
The XenApp
Administrator must now configure the priority of traffic routed through these
ports.
Tasks:
1. Designate the office Productivity worker group as the
only worker group that will be impacted by the new prioritization.
2. Ensure
session reliability uses priority.
3. Configure
printing to use the lowest priority.
As the XenApp
Administrator, create a new policy that compiles with the engineer’s requests.
Answer: Here are
the step by step solution to this.
(No answer given… you’ll have to “wing
it” on this one…)
QUESTION NO: 99
CORRECT TEXT
Scenario: the IT manager for Xirtic has instructed the Citrix Administrator to assist
the networking team with enabling Quality of service (QoS)
for traffic between the Seoul and Tokyo offices. The networking team has stated
that users at the Seoul office will communicate over port 2601 while users at
the Tokyo office will communicate over port 2602.
These are two worker groups in
the environment:
Engineering
Apps
XTXATY01
XTXASL02
Office
Productivity
XTXATY02
XTXASL01
QoS is explicitly
disabled for all user who connect to the XenApp environment.
Tasks:
Configure two XenApp policies to meet the requirements specified in the
environment. Use the
following naming
convention:
Policy1
Policy2
(No answer given… you’ll have to “wing
it” on this one…)
QUESTION NO:
100 CORRECT TEXT
Scenario: Xirtic
recently expanded and added two new branch offices: Northwest Office and
Southwest
office.
Information about Xirtic employees:
Members of the
sales staff roam between the Tokyo office and two branch offices.
Members of the Accounting staff roam between the Tokyo
office and the northwest branch office.
These staff members travel with their corporate-issued
notebooks when roaming between offices.
All employees
in these offices print to shard, network printers.
Users Complaints:
At the new branch offices, users have been complaining about
poor experience, such as long print wait times.
The network team has indicated the WAN link between the
Tokyo office and branch offices is usually saturated.
The Tokyo office and the branch
offices are on the following subnets:
Tokyo:
10.73.6.0/24
Northwest
Branch office: 10.73.9.0/24
Southwest
Branch office: 10.73.12.24
The following user groups exist
within the environment:
Tokyo
Sales
Accounting
Northwest
Southwest
Each branch office has its own
organization unit.
Tokyo
Northwest
Southwest
The XenApp
Administrator needs to improve the user experience in the branch offices by
limiting printing bandwidth to 20% of the total session bandwidth, which is 512
kbps.
Task:
Create and configure one policy
to meet the requirement as stated in the scenario.
Name the policy “Policy1”.
(No answer given… you’ll have to “wing
it” on this one…)
QUESTION NO:
101 CORRECT TEXT
Scenario: due to an earthquake
that destroyed the office in Penang, employees in the Penang
office will
temporarily work from the Seoul office. The Seoul office was already bandwidth-constrained;
the addition of 50 engineers – who need to primarily access a design
application
through the XenApp 6.5 farm – has
created a variety of issues for the IT department.
Information about the
applications used by the engineers:
The engineers
only access the engineering and office productivity application.
All of the specialty applications that the engineers use are
segregated into the Engineering Apps group.
The specialty applications that he engineers use are occasionally
accessed by non-engineering users.
The XenApp
Administrator must take all possible steps to reduce network bandwidth
utilization for User sessions until the WAN link can be upgraded and/or Branch
repeater can be installed.
Information about the current
environment and application usage:
There are NO
concerns regarding existing datacenter server or farm resources
Existing
resources are abundant
The engineers
print large, complex drawings that do not use the Citrix UPD
The bandwidth
concerned by those print jobs needs to be limited
The engineering accept that limiting the bandwidth consumed
by print jobs means that print jobs may take longer, and during peak times,
quality of video may be degraded.
Users from
other offices also connect to the environment.
In order to optimize bandwidth
usage, an architect has recommended that the XenApp administrator
set all image-related visual display compression settings to the maximum level
of
Penang Users and Seoul Users
only, and set the maximum threshold to 100 kbps. Printer
bandwidth related issues
will be addressed at a later time.
Task:
Configure the appropriate policy
to meet the recommendations by the architect and the
requirements presented in
the scenario.
(No answer given… you’ll have to “wing it”
on this one…)